PDA

View Full Version : System ASPI Files



Arioch
20-07-2005, 12:30 AM
Hi,
I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
in the New Compilation Box on start up.
I have run the Nero Tool kit and it informs me that i have no System Aspi
files installed.
.. wnaspi32.dll
.. aspi32.sys
.. winaspi.dll
.. wowpost.exe

Can some one tell me how i reinstall the above files from my system disk
( Windows XP Pro' ) with out having to reinstall windows?

Yours gratefully

Arioch

Jaymon
20-07-2005, 09:20 AM
If you don't have a SCSI device connected, the system aspi drivers are not
needed.
You may need to take a look at the update packages offered for Nero. Do you
use Nero's Incd too?
http://www.nero.com/en/nero-up.php

Look here for great info on your aspi drivers
http://aspi.radified.com/

j;-)

"Arioch" wrote:

> Hi,
> I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
> in the New Compilation Box on start up.
> I have run the Nero Tool kit and it informs me that i have no System Aspi
> files installed.
> . wnaspi32.dll
> . aspi32.sys
> . winaspi.dll
> . wowpost.exe
>
> Can some one tell me how i reinstall the above files from my system disk
> ( Windows XP Pro' ) with out having to reinstall windows?
>
> Yours gratefully
>
> Arioch
>
>

Ext User(Arioch)
29-07-2005, 12:43 AM
I am running version 4 of InCD and version 6.6.0.5 burning Rom.
I have now managed to install
v 4.71 (0002) WNASPI32.dll & ASPI32.sys
v 4.60 (1021) WINASPI.dll & WOWPOST.exe
and this has given me the DVD write option when Nero starts,
My new problem is that Nero still fails to find my Samsung CDR/DVD SM-332B
drive.
When i select the burn option the write speed selection is blank and there is
no continue option?
I have run Nero toolkit and the supported read features are has follows>>

CDR [/] DVD-R [/] DVD+R DL [ ]
CD-RW [/] DVD-RW [/] CD Text [/]
DVD RAM [ ] DVD+R [ ] CD+G [/]
DVD-ROM [/] DVD+RW [ ] C2 Errors [/]

and the supported write features are as follows>>

CDR [/] DVD-R [ ] DVD+R DL [ ]
CD-RW [/] DVD-RW [ ] Mount Rainier [ ]
DVD RAM [ ] DVD+R [ ] Buffer underrun protection [ ]
DVD+RW [ ]

Modes: Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO16,
RAW SAO96, RAW DAO16, RAW DAO96



"Jaymon" wrote:

> If you don't have a SCSI device connected, the system aspi drivers are not
> needed.
> You may need to take a look at the update packages offered for Nero. Do you
> use Nero's Incd too?
> http://www.nero.com/en/nero-up.php
>
> Look here for great info on your aspi drivers
> http://aspi.radified.com/
>
> j;-)
>
> "Arioch" wrote:
>
> > Hi,
> > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
> > in the New Compilation Box on start up.
> > I have run the Nero Tool kit and it informs me that i have no System Aspi
> > files installed.
> > . wnaspi32.dll
> > . aspi32.sys
> > . winaspi.dll
> > . wowpost.exe
> >
> > Can some one tell me how i reinstall the above files from my system disk
> > ( Windows XP Pro' ) with out having to reinstall windows?
> >
> > Yours gratefully
> >
> > Arioch
> >
> >

Ext User(Noel S Pamfree)
29-07-2005, 01:13 AM
I had this problem and in the end I found that InCD is not compatible with
XP.

I uninstalled InCD and after that Nero worked fine and always found my
CD/DVD drives.

Noel


"Arioch" <Arioch@discussions.microsoft.com> wrote in message
news:F9B79F2C-04C5-4966-8410-41F91E5AD513@microsoft.com...
>I am running version 4 of InCD and version 6.6.0.5 burning Rom.
> I have now managed to install
> v 4.71 (0002) WNASPI32.dll & ASPI32.sys
> v 4.60 (1021) WINASPI.dll & WOWPOST.exe
> and this has given me the DVD write option when Nero starts,
> My new problem is that Nero still fails to find my Samsung CDR/DVD SM-332B
> drive.
> When i select the burn option the write speed selection is blank and there
> is
> no continue option?
> I have run Nero toolkit and the supported read features are has follows>>
>
> CDR [/] DVD-R [/] DVD+R DL [ ]
> CD-RW [/] DVD-RW [/] CD Text [/]
> DVD RAM [ ] DVD+R [ ] CD+G [/]
> DVD-ROM [/] DVD+RW [ ] C2 Errors [/]
>
> and the supported write features are as follows>>
>
> CDR [/] DVD-R [ ] DVD+R DL [ ]
> CD-RW [/] DVD-RW [ ] Mount Rainier [ ]
> DVD RAM [ ] DVD+R [ ] Buffer underrun protection [ ]
> DVD+RW [ ]
>
> Modes: Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO16,
> RAW SAO96, RAW DAO16, RAW DAO96
>
>
>
> "Jaymon" wrote:
>
>> If you don't have a SCSI device connected, the system aspi drivers are
>> not
>> needed.
>> You may need to take a look at the update packages offered for Nero. Do
>> you
>> use Nero's Incd too?
>> http://www.nero.com/en/nero-up.php
>>
>> Look here for great info on your aspi drivers
>> http://aspi.radified.com/
>>
>> j;-)
>>
>> "Arioch" wrote:
>>
>> > Hi,
>> > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing
>> > option
>> > in the New Compilation Box on start up.
>> > I have run the Nero Tool kit and it informs me that i have no System
>> > Aspi
>> > files installed.
>> > . wnaspi32.dll
>> > . aspi32.sys
>> > . winaspi.dll
>> > . wowpost.exe
>> >
>> > Can some one tell me how i reinstall the above files from my system
>> > disk
>> > ( Windows XP Pro' ) with out having to reinstall windows?
>> >
>> > Yours gratefully
>> >
>> > Arioch
>> >
>> >

Ext User(Jaymon)
29-07-2005, 02:43 AM
InCd is compatible with XP and has been for some time check out the link
below and feel free to coment...

http://aumha.org/win5/a/xpcd.php

j;-)

"Noel S Pamfree" wrote:

> I had this problem and in the end I found that InCD is not compatible with
> XP.
>
> I uninstalled InCD and after that Nero worked fine and always found my
> CD/DVD drives.
>
> Noel
>
>
> "Arioch" <Arioch@discussions.microsoft.com> wrote in message
> news:F9B79F2C-04C5-4966-8410-41F91E5AD513@microsoft.com...
> >I am running version 4 of InCD and version 6.6.0.5 burning Rom.
> > I have now managed to install
> > v 4.71 (0002) WNASPI32.dll & ASPI32.sys
> > v 4.60 (1021) WINASPI.dll & WOWPOST.exe
> > and this has given me the DVD write option when Nero starts,
> > My new problem is that Nero still fails to find my Samsung CDR/DVD SM-332B
> > drive.
> > When i select the burn option the write speed selection is blank and there
> > is
> > no continue option?
> > I have run Nero toolkit and the supported read features are has follows>>
> >
> > CDR [/] DVD-R [/] DVD+R DL [ ]
> > CD-RW [/] DVD-RW [/] CD Text [/]
> > DVD RAM [ ] DVD+R [ ] CD+G [/]
> > DVD-ROM [/] DVD+RW [ ] C2 Errors [/]
> >
> > and the supported write features are as follows>>
> >
> > CDR [/] DVD-R [ ] DVD+R DL [ ]
> > CD-RW [/] DVD-RW [ ] Mount Rainier [ ]
> > DVD RAM [ ] DVD+R [ ] Buffer underrun protection [ ]
> > DVD+RW [ ]
> >
> > Modes: Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO16,
> > RAW SAO96, RAW DAO16, RAW DAO96
> >
> >
> >
> > "Jaymon" wrote:
> >
> >> If you don't have a SCSI device connected, the system aspi drivers are
> >> not
> >> needed.
> >> You may need to take a look at the update packages offered for Nero. Do
> >> you
> >> use Nero's Incd too?
> >> http://www.nero.com/en/nero-up.php
> >>
> >> Look here for great info on your aspi drivers
> >> http://aspi.radified.com/
> >>
> >> j;-)
> >>
> >> "Arioch" wrote:
> >>
> >> > Hi,
> >> > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing
> >> > option
> >> > in the New Compilation Box on start up.
> >> > I have run the Nero Tool kit and it informs me that i have no System
> >> > Aspi
> >> > files installed.
> >> > . wnaspi32.dll
> >> > . aspi32.sys
> >> > . winaspi.dll
> >> > . wowpost.exe
> >> >
> >> > Can some one tell me how i reinstall the above files from my system
> >> > disk
> >> > ( Windows XP Pro' ) with out having to reinstall windows?
> >> >
> >> > Yours gratefully
> >> >
> >> > Arioch
> >> >
> >> >
>
>
>

Ext User(Jaymon)
29-07-2005, 03:13 AM
Ok, run the Nero info tool and post the ID string for the drive in question
and the firmware ver # and the full make model on this drive word for word,
off the box too if you still have it. Did you install the drive yourself?
Again, ASPI is only relevant for SCSI drives, so we need to make sure your
drive is SCSI or IDE compatible or both or one or the other. Is the drive new
retail, in a laptop/desktop, 1st or 2nd channel installation? Sorry for all
the questions but I need to form a mental picture of what is going on, on a
system I can't see...

See how to read ID string link:
http://www.iomagic.com/Firmware/NeroInfotool/neroinfotool.html

j;-)
"Arioch" wrote:

> I am running version 4 of InCD and version 6.6.0.5 burning Rom.
> I have now managed to install
> v 4.71 (0002) WNASPI32.dll & ASPI32.sys
> v 4.60 (1021) WINASPI.dll & WOWPOST.exe
> and this has given me the DVD write option when Nero starts,
> My new problem is that Nero still fails to find my Samsung CDR/DVD SM-332B
> drive.
> When i select the burn option the write speed selection is blank and there is
> no continue option?
> I have run Nero toolkit and the supported read features are has follows>>
>
> CDR [/] DVD-R [/] DVD+R DL [ ]
> CD-RW [/] DVD-RW [/] CD Text [/]
> DVD RAM [ ] DVD+R [ ] CD+G [/]
> DVD-ROM [/] DVD+RW [ ] C2 Errors [/]
>
> and the supported write features are as follows>>
>
> CDR [/] DVD-R [ ] DVD+R DL [ ]
> CD-RW [/] DVD-RW [ ] Mount Rainier [ ]
> DVD RAM [ ] DVD+R [ ] Buffer underrun protection [ ]
> DVD+RW [ ]
>
> Modes: Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO16,
> RAW SAO96, RAW DAO16, RAW DAO96
>
>
>
> "Jaymon" wrote:
>
> > If you don't have a SCSI device connected, the system aspi drivers are not
> > needed.
> > You may need to take a look at the update packages offered for Nero. Do you
> > use Nero's Incd too?
> > http://www.nero.com/en/nero-up.php
> >
> > Look here for great info on your aspi drivers
> > http://aspi.radified.com/
> >
> > j;-)
> >
> > "Arioch" wrote:
> >
> > > Hi,
> > > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
> > > in the New Compilation Box on start up.
> > > I have run the Nero Tool kit and it informs me that i have no System Aspi
> > > files installed.
> > > . wnaspi32.dll
> > > . aspi32.sys
> > > . winaspi.dll
> > > . wowpost.exe
> > >
> > > Can some one tell me how i reinstall the above files from my system disk
> > > ( Windows XP Pro' ) with out having to reinstall windows?
> > >
> > > Yours gratefully
> > >
> > > Arioch
> > >
> > >

Ext User(Jaymon)
29-07-2005, 05:03 AM
This site shows the danger as relates to your drives firmware:
http://club.cdfreaks.com/showthread.php?t=92784
This site has a liveupdate module that you download to check your firmware
and to offer updates if available for your specific drive:
http://www.samsungoms-europe.com/samsung.php?section=download

The drive you have seems to be problematic to say the least..
You may need to upgrade the drive for a newer one, if all else fails?

Have you tried to uninstall in device manager the drive and then let XP
search for new hardware changes or uninstall and reboot for same affect?

Also in device manager look under IDE ATA/ATAPI controllers or equivalent
for your system and see primary & secondary channels and were you know your
drive is right click, properties, advanced tab and see if set to "DMA if
available" you can experiment here if needed. Under driver details what are
the file names shown?
I have two atapi.sys and storprop.dll signed by MWP..

Also, InCd should have it's own tab in my computer, drive, properties with a
format and erase button, can you format a DVD+/-RW here? What is the stated
speed of the media your using 4x,6x and is it within the drives burn speed
capabilities?

Try this uninstall the drive in device manager, uninstall all Nero software
and shutdown the machine cold. Reboot and let windows find the drive and set
it up, then reinstall Nero software and reboot..Any change?
j;-)

"Arioch" wrote:

> I am running version 4 of InCD and version 6.6.0.5 burning Rom.
> I have now managed to install
> v 4.71 (0002) WNASPI32.dll & ASPI32.sys
> v 4.60 (1021) WINASPI.dll & WOWPOST.exe
> and this has given me the DVD write option when Nero starts,
> My new problem is that Nero still fails to find my Samsung CDR/DVD SM-332B
> drive.
> When i select the burn option the write speed selection is blank and there is
> no continue option?
> I have run Nero toolkit and the supported read features are has follows>>
>
> CDR [/] DVD-R [/] DVD+R DL [ ]
> CD-RW [/] DVD-RW [/] CD Text [/]
> DVD RAM [ ] DVD+R [ ] CD+G [/]
> DVD-ROM [/] DVD+RW [ ] C2 Errors [/]
>
> and the supported write features are as follows>>
>
> CDR [/] DVD-R [ ] DVD+R DL [ ]
> CD-RW [/] DVD-RW [ ] Mount Rainier [ ]
> DVD RAM [ ] DVD+R [ ] Buffer underrun protection [ ]
> DVD+RW [ ]
>
> Modes: Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO16,
> RAW SAO96, RAW DAO16, RAW DAO96
>
>
>
> "Jaymon" wrote:
>
> > If you don't have a SCSI device connected, the system aspi drivers are not
> > needed.
> > You may need to take a look at the update packages offered for Nero. Do you
> > use Nero's Incd too?
> > http://www.nero.com/en/nero-up.php
> >
> > Look here for great info on your aspi drivers
> > http://aspi.radified.com/
> >
> > j;-)
> >
> > "Arioch" wrote:
> >
> > > Hi,
> > > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
> > > in the New Compilation Box on start up.
> > > I have run the Nero Tool kit and it informs me that i have no System Aspi
> > > files installed.
> > > . wnaspi32.dll
> > > . aspi32.sys
> > > . winaspi.dll
> > > . wowpost.exe
> > >
> > > Can some one tell me how i reinstall the above files from my system disk
> > > ( Windows XP Pro' ) with out having to reinstall windows?
> > >
> > > Yours gratefully
> > >
> > > Arioch
> > >
> > >

Ext User(Arioch)
29-07-2005, 06:53 AM
I have tried all of the suggestions and it seems that my drive is corrupt,
XP only recognises it as a CD-Rom and not a combi.
I have tried the Firmware and still there is no change i have now ordered a
NEW NEC combi drive, when it arrives i will start from scratch by going for a
complete XP reinstall.

Thank you for your help

Arioch
http://www.vanessa-mae.co.uk

"Jaymon" wrote:

> This site shows the danger as relates to your drives firmware:
> http://club.cdfreaks.com/showthread.php?t=92784
> This site has a liveupdate module that you download to check your firmware
> and to offer updates if available for your specific drive:
> http://www.samsungoms-europe.com/samsung.php?section=download
>
> The drive you have seems to be problematic to say the least..
> You may need to upgrade the drive for a newer one, if all else fails?
>
> Have you tried to uninstall in device manager the drive and then let XP
> search for new hardware changes or uninstall and reboot for same affect?
>
> Also in device manager look under IDE ATA/ATAPI controllers or equivalent
> for your system and see primary & secondary channels and were you know your
> drive is right click, properties, advanced tab and see if set to "DMA if
> available" you can experiment here if needed. Under driver details what are
> the file names shown?
> I have two atapi.sys and storprop.dll signed by MWP..
>
> Also, InCd should have it's own tab in my computer, drive, properties with a
> format and erase button, can you format a DVD+/-RW here? What is the stated
> speed of the media your using 4x,6x and is it within the drives burn speed
> capabilities?
>
> Try this uninstall the drive in device manager, uninstall all Nero software
> and shutdown the machine cold. Reboot and let windows find the drive and set
> it up, then reinstall Nero software and reboot..Any change?
> j;-)
>
> "Arioch" wrote:
>
> > I am running version 4 of InCD and version 6.6.0.5 burning Rom.
> > I have now managed to install
> > v 4.71 (0002) WNASPI32.dll & ASPI32.sys
> > v 4.60 (1021) WINASPI.dll & WOWPOST.exe
> > and this has given me the DVD write option when Nero starts,
> > My new problem is that Nero still fails to find my Samsung CDR/DVD SM-332B
> > drive.
> > When i select the burn option the write speed selection is blank and there is
> > no continue option?
> > I have run Nero toolkit and the supported read features are has follows>>
> >
> > CDR [/] DVD-R [/] DVD+R DL [ ]
> > CD-RW [/] DVD-RW [/] CD Text [/]
> > DVD RAM [ ] DVD+R [ ] CD+G [/]
> > DVD-ROM [/] DVD+RW [ ] C2 Errors [/]
> >
> > and the supported write features are as follows>>
> >
> > CDR [/] DVD-R [ ] DVD+R DL [ ]
> > CD-RW [/] DVD-RW [ ] Mount Rainier [ ]
> > DVD RAM [ ] DVD+R [ ] Buffer underrun protection [ ]
> > DVD+RW [ ]
> >
> > Modes: Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO16,
> > RAW SAO96, RAW DAO16, RAW DAO96
> >
> >
> >
> > "Jaymon" wrote:
> >
> > > If you don't have a SCSI device connected, the system aspi drivers are not
> > > needed.
> > > You may need to take a look at the update packages offered for Nero. Do you
> > > use Nero's Incd too?
> > > http://www.nero.com/en/nero-up.php
> > >
> > > Look here for great info on your aspi drivers
> > > http://aspi.radified.com/
> > >
> > > j;-)
> > >
> > > "Arioch" wrote:
> > >
> > > > Hi,
> > > > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
> > > > in the New Compilation Box on start up.
> > > > I have run the Nero Tool kit and it informs me that i have no System Aspi
> > > > files installed.
> > > > . wnaspi32.dll
> > > > . aspi32.sys
> > > > . winaspi.dll
> > > > . wowpost.exe
> > > >
> > > > Can some one tell me how i reinstall the above files from my system disk
> > > > ( Windows XP Pro' ) with out having to reinstall windows?
> > > >
> > > > Yours gratefully
> > > >
> > > > Arioch
> > > >
> > > >

Ext User(Noel S Pamfree)
01-08-2005, 01:53 AM
All I can say is that it wasn't compatible on the pc I was working on! The
owner could not access either the CD or DVD drive unless the CD was in when
the machine was turned on initially. I spent hours trying all the usual
things and then got a tip from someone in a newsgroup asking if I had Nero
on the machine. After removing it everything worked fine and continues to
do so. So I don't care what the website claims - it was not compatible on
that machine!

Noel


"Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
news:C2C70690-C9DC-456A-998A-11023E9B9FD7@microsoft.com...
> InCd is compatible with XP and has been for some time check out the link
> below and feel free to coment...
>
> http://aumha.org/win5/a/xpcd.php
>
> j;-)
>
> "Noel S Pamfree" wrote:
>
>> I had this problem and in the end I found that InCD is not compatible
>> with
>> XP.
>>
>> I uninstalled InCD and after that Nero worked fine and always found my
>> CD/DVD drives.
>>
>> Noel
>>
>>
>> "Arioch" <Arioch@discussions.microsoft.com> wrote in message
>> news:F9B79F2C-04C5-4966-8410-41F91E5AD513@microsoft.com...
>> >I am running version 4 of InCD and version 6.6.0.5 burning Rom.
>> > I have now managed to install
>> > v 4.71 (0002) WNASPI32.dll & ASPI32.sys
>> > v 4.60 (1021) WINASPI.dll & WOWPOST.exe
>> > and this has given me the DVD write option when Nero starts,
>> > My new problem is that Nero still fails to find my Samsung CDR/DVD
>> > SM-332B
>> > drive.
>> > When i select the burn option the write speed selection is blank and
>> > there
>> > is
>> > no continue option?
>> > I have run Nero toolkit and the supported read features are has
>> > follows>>
>> >
>> > CDR [/] DVD-R [/] DVD+R DL [ ]
>> > CD-RW [/] DVD-RW [/] CD Text [/]
>> > DVD RAM [ ] DVD+R [ ] CD+G [/]
>> > DVD-ROM [/] DVD+RW [ ] C2 Errors [/]
>> >
>> > and the supported write features are as follows>>
>> >
>> > CDR [/] DVD-R [ ] DVD+R DL [ ]
>> > CD-RW [/] DVD-RW [ ] Mount Rainier [ ]
>> > DVD RAM [ ] DVD+R [ ] Buffer underrun protection [ ]
>> > DVD+RW [ ]
>> >
>> > Modes: Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO16,
>> > RAW SAO96, RAW DAO16, RAW DAO96
>> >
>> >
>> >
>> > "Jaymon" wrote:
>> >
>> >> If you don't have a SCSI device connected, the system aspi drivers are
>> >> not
>> >> needed.
>> >> You may need to take a look at the update packages offered for Nero.
>> >> Do
>> >> you
>> >> use Nero's Incd too?
>> >> http://www.nero.com/en/nero-up.php
>> >>
>> >> Look here for great info on your aspi drivers
>> >> http://aspi.radified.com/
>> >>
>> >> j;-)
>> >>
>> >> "Arioch" wrote:
>> >>
>> >> > Hi,
>> >> > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD
>> >> > writing
>> >> > option
>> >> > in the New Compilation Box on start up.
>> >> > I have run the Nero Tool kit and it informs me that i have no System
>> >> > Aspi
>> >> > files installed.
>> >> > . wnaspi32.dll
>> >> > . aspi32.sys
>> >> > . winaspi.dll
>> >> > . wowpost.exe
>> >> >
>> >> > Can some one tell me how i reinstall the above files from my system
>> >> > disk
>> >> > ( Windows XP Pro' ) with out having to reinstall windows?
>> >> >
>> >> > Yours gratefully
>> >> >
>> >> > Arioch
>> >> >
>> >> >
>>
>>
>>

Ext User(Jaymon)
01-08-2005, 04:33 AM
Well, Nero [5.5.10.56 bundeled (updated)] works as well as [InCD
4.3.14.1(updated)] on my drive (self-installed HI-VAL), only after I did a
firmware update for the drive, though. Did you just remove InCD (what ver#?)
or the complete Nero package (what ver#?) was Nero bundled with the recorder
or was it the retail ver? I assume you are saying the drives were CD-RW and
DVD-ROM..And that the customer had no need for using CD-/+RW disks or any
third party burning software, what so ever?
Perhaps, it (Nero/InCD ver?) was not compatible with the drives firmware
after XP SP2 was installed? Was it an OEM's drive?

Inquiring minds want to know...

J;-)

"Noel S Pamfree" wrote:

> All I can say is that it wasn't compatible on the pc I was working on! The
> owner could not access either the CD or DVD drive unless the CD was in when
> the machine was turned on initially. I spent hours trying all the usual
> things and then got a tip from someone in a newsgroup asking if I had Nero
> on the machine. After removing it everything worked fine and continues to
> do so. So I don't care what the website claims - it was not compatible on
> that machine!
>
> Noel
>
>
> "Jaymon" <Jaymon@discussions.microsoft.com> wrote in message
> news:C2C70690-C9DC-456A-998A-11023E9B9FD7@microsoft.com...
> > InCd is compatible with XP and has been for some time check out the link
> > below and feel free to coment...
> >
> > http://aumha.org/win5/a/xpcd.php
> >
> > j;-)
> >
> > "Noel S Pamfree" wrote:
> >
> >> I had this problem and in the end I found that InCD is not compatible
> >> with
> >> XP.
> >>
> >> I uninstalled InCD and after that Nero worked fine and always found my
> >> CD/DVD drives.
> >>
> >> Noel
> >>
> >>
> >> "Arioch" <Arioch@discussions.microsoft.com> wrote in message
> >> news:F9B79F2C-04C5-4966-8410-41F91E5AD513@microsoft.com...
> >> >I am running version 4 of InCD and version 6.6.0.5 burning Rom.
> >> > I have now managed to install
> >> > v 4.71 (0002) WNASPI32.dll & ASPI32.sys
> >> > v 4.60 (1021) WINASPI.dll & WOWPOST.exe
> >> > and this has given me the DVD write option when Nero starts,
> >> > My new problem is that Nero still fails to find my Samsung CDR/DVD
> >> > SM-332B
> >> > drive.
> >> > When i select the burn option the write speed selection is blank and
> >> > there
> >> > is
> >> > no continue option?
> >> > I have run Nero toolkit and the supported read features are has
> >> > follows>>
> >> >
> >> > CDR [/] DVD-R [/] DVD+R DL [ ]
> >> > CD-RW [/] DVD-RW [/] CD Text [/]
> >> > DVD RAM [ ] DVD+R [ ] CD+G [/]
> >> > DVD-ROM [/] DVD+RW [ ] C2 Errors [/]
> >> >
> >> > and the supported write features are as follows>>
> >> >
> >> > CDR [/] DVD-R [ ] DVD+R DL [ ]
> >> > CD-RW [/] DVD-RW [ ] Mount Rainier [ ]
> >> > DVD RAM [ ] DVD+R [ ] Buffer underrun protection [ ]
> >> > DVD+RW [ ]
> >> >
> >> > Modes: Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO16,
> >> > RAW SAO96, RAW DAO16, RAW DAO96
> >> >
> >> >
> >> >
> >> > "Jaymon" wrote:
> >> >
> >> >> If you don't have a SCSI device connected, the system aspi drivers are
> >> >> not
> >> >> needed.
> >> >> You may need to take a look at the update packages offered for Nero.
> >> >> Do
> >> >> you
> >> >> use Nero's Incd too?
> >> >> http://www.nero.com/en/nero-up.php
> >> >>
> >> >> Look here for great info on your aspi drivers
> >> >> http://aspi.radified.com/
> >> >>
> >> >> j;-)
> >> >>
> >> >> "Arioch" wrote:
> >> >>
> >> >> > Hi,
> >> >> > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD
> >> >> > writing
> >> >> > option
> >> >> > in the New Compilation Box on start up.
> >> >> > I have run the Nero Tool kit and it informs me that i have no System
> >> >> > Aspi
> >> >> > files installed.
> >> >> > . wnaspi32.dll
> >> >> > . aspi32.sys
> >> >> > . winaspi.dll
> >> >> > . wowpost.exe
> >> >> >
> >> >> > Can some one tell me how i reinstall the above files from my system
> >> >> > disk
> >> >> > ( Windows XP Pro' ) with out having to reinstall windows?
> >> >> >
> >> >> > Yours gratefully
> >> >> >
> >> >> > Arioch
> >> >> >
> >> >> >
> >>
> >>
> >>
>
>
>

Ext User(Arioch)
01-08-2005, 07:43 PM
Hi guys,
Just want to let you know that I tried uninstalling Nero and InCD, I even
reformatted my drive and reinstalled windows still no change.
Jayman I took your advice after trying all of the other suggestions and i
have just installed
a New NEC CD/DVD re-writer drive and Nero now works so it seems my re-writer
had packed up. Typical 1 month after the warranty expired:( this is the last
time
i buy a Samsung product!!!

Ps.. Guys no fighting, All PC's are different not a single PC behaves the
same way
as we all know.

Many thanks for your valuable assistance

Arioch

"Jaymon" wrote:

> This site shows the danger as relates to your drives firmware:
> http://club.cdfreaks.com/showthread.php?t=92784
> This site has a liveupdate module that you download to check your firmware
> and to offer updates if available for your specific drive:
> http://www.samsungoms-europe.com/samsung.php?section=download
>
> The drive you have seems to be problematic to say the least..
> You may need to upgrade the drive for a newer one, if all else fails?
>
> Have you tried to uninstall in device manager the drive and then let XP
> search for new hardware changes or uninstall and reboot for same affect?
>
> Also in device manager look under IDE ATA/ATAPI controllers or equivalent
> for your system and see primary & secondary channels and were you know your
> drive is right click, properties, advanced tab and see if set to "DMA if
> available" you can experiment here if needed. Under driver details what are
> the file names shown?
> I have two atapi.sys and storprop.dll signed by MWP..
>
> Also, InCd should have it's own tab in my computer, drive, properties with a
> format and erase button, can you format a DVD+/-RW here? What is the stated
> speed of the media your using 4x,6x and is it within the drives burn speed
> capabilities?
>
> Try this uninstall the drive in device manager, uninstall all Nero software
> and shutdown the machine cold. Reboot and let windows find the drive and set
> it up, then reinstall Nero software and reboot..Any change?
> j;-)
>
> "Arioch" wrote:
>
> > I am running version 4 of InCD and version 6.6.0.5 burning Rom.
> > I have now managed to install
> > v 4.71 (0002) WNASPI32.dll & ASPI32.sys
> > v 4.60 (1021) WINASPI.dll & WOWPOST.exe
> > and this has given me the DVD write option when Nero starts,
> > My new problem is that Nero still fails to find my Samsung CDR/DVD SM-332B
> > drive.
> > When i select the burn option the write speed selection is blank and there is
> > no continue option?
> > I have run Nero toolkit and the supported read features are has follows>>
> >
> > CDR [/] DVD-R [/] DVD+R DL [ ]
> > CD-RW [/] DVD-RW [/] CD Text [/]
> > DVD RAM [ ] DVD+R [ ] CD+G [/]
> > DVD-ROM [/] DVD+RW [ ] C2 Errors [/]
> >
> > and the supported write features are as follows>>
> >
> > CDR [/] DVD-R [ ] DVD+R DL [ ]
> > CD-RW [/] DVD-RW [ ] Mount Rainier [ ]
> > DVD RAM [ ] DVD+R [ ] Buffer underrun protection [ ]
> > DVD+RW [ ]
> >
> > Modes: Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO16,
> > RAW SAO96, RAW DAO16, RAW DAO96
> >
> >
> >
> > "Jaymon" wrote:
> >
> > > If you don't have a SCSI device connected, the system aspi drivers are not
> > > needed.
> > > You may need to take a look at the update packages offered for Nero. Do you
> > > use Nero's Incd too?
> > > http://www.nero.com/en/nero-up.php
> > >
> > > Look here for great info on your aspi drivers
> > > http://aspi.radified.com/
> > >
> > > j;-)
> > >
> > > "Arioch" wrote:
> > >
> > > > Hi,
> > > > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
> > > > in the New Compilation Box on start up.
> > > > I have run the Nero Tool kit and it informs me that i have no System Aspi
> > > > files installed.
> > > > . wnaspi32.dll
> > > > . aspi32.sys
> > > > . winaspi.dll
> > > > . wowpost.exe
> > > >
> > > > Can some one tell me how i reinstall the above files from my system disk
> > > > ( Windows XP Pro' ) with out having to reinstall windows?
> > > >
> > > > Yours gratefully
> > > >
> > > > Arioch
> > > >
> > > >

Ext User(Jaymon)
02-08-2005, 01:43 AM
Well, that's music too my ears...
I hope you didn't have to fiddle around to long with the new drive to get it
up and running again..;-)

j;-)

"Arioch" wrote:

> Hi guys,
> Just want to let you know that I tried uninstalling Nero and InCD, I even
> reformatted my drive and reinstalled windows still no change.
> Jayman I took your advice after trying all of the other suggestions and i
> have just installed
> a New NEC CD/DVD re-writer drive and Nero now works so it seems my re-writer
> had packed up. Typical 1 month after the warranty expired:( this is the last
> time
> i buy a Samsung product!!!
>
> Ps.. Guys no fighting, All PC's are different not a single PC behaves the
> same way
> as we all know.
>
> Many thanks for your valuable assistance
>
> Arioch
>
> "Jaymon" wrote:
>
> > This site shows the danger as relates to your drives firmware:
> > http://club.cdfreaks.com/showthread.php?t=92784
> > This site has a liveupdate module that you download to check your firmware
> > and to offer updates if available for your specific drive:
> > http://www.samsungoms-europe.com/samsung.php?section=download
> >
> > The drive you have seems to be problematic to say the least..
> > You may need to upgrade the drive for a newer one, if all else fails?
> >
> > Have you tried to uninstall in device manager the drive and then let XP
> > search for new hardware changes or uninstall and reboot for same affect?
> >
> > Also in device manager look under IDE ATA/ATAPI controllers or equivalent
> > for your system and see primary & secondary channels and were you know your
> > drive is right click, properties, advanced tab and see if set to "DMA if
> > available" you can experiment here if needed. Under driver details what are
> > the file names shown?
> > I have two atapi.sys and storprop.dll signed by MWP..
> >
> > Also, InCd should have it's own tab in my computer, drive, properties with a
> > format and erase button, can you format a DVD+/-RW here? What is the stated
> > speed of the media your using 4x,6x and is it within the drives burn speed
> > capabilities?
> >
> > Try this uninstall the drive in device manager, uninstall all Nero software
> > and shutdown the machine cold. Reboot and let windows find the drive and set
> > it up, then reinstall Nero software and reboot..Any change?
> > j;-)
> >
> > "Arioch" wrote:
> >
> > > I am running version 4 of InCD and version 6.6.0.5 burning Rom.
> > > I have now managed to install
> > > v 4.71 (0002) WNASPI32.dll & ASPI32.sys
> > > v 4.60 (1021) WINASPI.dll & WOWPOST.exe
> > > and this has given me the DVD write option when Nero starts,
> > > My new problem is that Nero still fails to find my Samsung CDR/DVD SM-332B
> > > drive.
> > > When i select the burn option the write speed selection is blank and there is
> > > no continue option?
> > > I have run Nero toolkit and the supported read features are has follows>>
> > >
> > > CDR [/] DVD-R [/] DVD+R DL [ ]
> > > CD-RW [/] DVD-RW [/] CD Text [/]
> > > DVD RAM [ ] DVD+R [ ] CD+G [/]
> > > DVD-ROM [/] DVD+RW [ ] C2 Errors [/]
> > >
> > > and the supported write features are as follows>>
> > >
> > > CDR [/] DVD-R [ ] DVD+R DL [ ]
> > > CD-RW [/] DVD-RW [ ] Mount Rainier [ ]
> > > DVD RAM [ ] DVD+R [ ] Buffer underrun protection [ ]
> > > DVD+RW [ ]
> > >
> > > Modes: Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO16,
> > > RAW SAO96, RAW DAO16, RAW DAO96
> > >
> > >
> > >
> > > "Jaymon" wrote:
> > >
> > > > If you don't have a SCSI device connected, the system aspi drivers are not
> > > > needed.
> > > > You may need to take a look at the update packages offered for Nero. Do you
> > > > use Nero's Incd too?
> > > > http://www.nero.com/en/nero-up.php
> > > >
> > > > Look here for great info on your aspi drivers
> > > > http://aspi.radified.com/
> > > >
> > > > j;-)
> > > >
> > > > "Arioch" wrote:
> > > >
> > > > > Hi,
> > > > > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
> > > > > in the New Compilation Box on start up.
> > > > > I have run the Nero Tool kit and it informs me that i have no System Aspi
> > > > > files installed.
> > > > > . wnaspi32.dll
> > > > > . aspi32.sys
> > > > > . winaspi.dll
> > > > > . wowpost.exe
> > > > >
> > > > > Can some one tell me how i reinstall the above files from my system disk
> > > > > ( Windows XP Pro' ) with out having to reinstall windows?
> > > > >
> > > > > Yours gratefully
> > > > >
> > > > > Arioch
> > > > >
> > > > >

Ext User(Francesca)
13-10-2005, 12:53 AM
I accidentally started the 'remove' process of MS WINASPI program (on
Toshiba laptop, XP plus). I realised what I had done and had to crash out
before it continued to uninstall stage - no other way of exiting. I DO need
to install a CD R/W ext. drive (in order to burn disc to transfer data to
new laptop).
How do I restore the ASPI files - could I possibly download them from
somewhere? The ext CD drive is a Freecom classic series. The Tosh can only
read CDs.
(I was in the remove progs function because I needed to remove MS Works -
it won't read French OpenOffice docs).
This is my first try at newsgroups. I hope you don't mind my
piggybacking/gatecrashing into this discussion - it sounds like you are the
expert! Thanks a lot - Francesca
"Jaymon" wrote:

> If you don't have a SCSI device connected, the system aspi drivers are not
> needed.
> You may need to take a look at the update packages offered for Nero. Do you
> use Nero's Incd too?
> http://www.nero.com/en/nero-up.php
>
> Look here for great info on your aspi drivers
> http://aspi.radified.com/
>
> j;-)
>
> "Arioch" wrote:
>
> > Hi,
> > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
> > in the New Compilation Box on start up.
> > I have run the Nero Tool kit and it informs me that i have no System Aspi
> > files installed.
> > . wnaspi32.dll
> > . aspi32.sys
> > . winaspi.dll
> > . wowpost.exe
> >
> > Can some one tell me how i reinstall the above files from my system disk
> > ( Windows XP Pro' ) with out having to reinstall windows?
> >
> > Yours gratefully
> >
> > Arioch
> >
> >

Ext User(Jaymon)
13-10-2005, 12:13 PM
Francesca,
You may not even need them, unless you receive an specific stop/error
message..
What software do you use to burn the cd's? Have you installed the eternal
CD-RW drive, included setup software, burning software etc..?
A good read here..
http://aumha.org/win5/a/xpcd.htm
Not sure, but look here and see if it applies..
http://support.microsoft.com/default.aspx?scid=kb;en-us;307128
Investigate here sivoplay'... lol,, sorry...
http://www.freecom.com/ecsupportdetail.asp?serie=CLASSIC+SERIES&group=10851&interface=1085104
Can you be even more specific, if you can, we', compre'
Pardon my French..
j;-j

"Francesca" wrote:

> I accidentally started the 'remove' process of MS WINASPI program (on
> Toshiba laptop, XP plus). I realised what I had done and had to crash out
> before it continued to uninstall stage - no other way of exiting. I DO need
> to install a CD R/W ext. drive (in order to burn disc to transfer data to
> new laptop).
> How do I restore the ASPI files - could I possibly download them from
> somewhere? The ext CD drive is a Freecom classic series. The Tosh can only
> read CDs.
> (I was in the remove progs function because I needed to remove MS Works -
> it won't read French OpenOffice docs).
> This is my first try at newsgroups. I hope you don't mind my
> piggybacking/gatecrashing into this discussion - it sounds like you are the
> expert! Thanks a lot - Francesca
> "Jaymon" wrote:
>
> > If you don't have a SCSI device connected, the system aspi drivers are not
> > needed.
> > You may need to take a look at the update packages offered for Nero. Do you
> > use Nero's Incd too?
> > http://www.nero.com/en/nero-up.php
> >
> > Look here for great info on your aspi drivers
> > http://aspi.radified.com/
> >
> > j;-)
> >
> > "Arioch" wrote:
> >
> > > Hi,
> > > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
> > > in the New Compilation Box on start up.
> > > I have run the Nero Tool kit and it informs me that i have no System Aspi
> > > files installed.
> > > . wnaspi32.dll
> > > . aspi32.sys
> > > . winaspi.dll
> > > . wowpost.exe
> > >
> > > Can some one tell me how i reinstall the above files from my system disk
> > > ( Windows XP Pro' ) with out having to reinstall windows?
> > >
> > > Yours gratefully
> > >
> > > Arioch
> > >
> > >

Ext User(Francesca)
13-10-2005, 05:53 PM
Thank you Jaymon. - Francesca

"Francesca" wrote:

> I accidentally started the 'remove' process of MS WINASPI program (on
> Toshiba laptop, XP plus). I realised what I had done and had to crash out
> before it continued to uninstall stage - no other way of exiting. I DO need
> to install a CD R/W ext. drive (in order to burn disc to transfer data to
> new laptop).
> How do I restore the ASPI files - could I possibly download them from
> somewhere? The ext CD drive is a Freecom classic series. The Tosh can only
> read CDs.
> (I was in the remove progs function because I needed to remove MS Works -
> it won't read French OpenOffice docs).
> This is my first try at newsgroups. I hope you don't mind my
> piggybacking/gatecrashing into this discussion - it sounds like you are the
> expert! Thanks a lot - Francesca
> "Jaymon" wrote:
>
> > If you don't have a SCSI device connected, the system aspi drivers are not
> > needed.
> > You may need to take a look at the update packages offered for Nero. Do you
> > use Nero's Incd too?
> > http://www.nero.com/en/nero-up.php
> >
> > Look here for great info on your aspi drivers
> > http://aspi.radified.com/
> >
> > j;-)
> >
> > "Arioch" wrote:
> >
> > > Hi,
> > > I am running Nero Burning Rom 6.6.0.5 and i am missing the DVD writing option
> > > in the New Compilation Box on start up.
> > > I have run the Nero Tool kit and it informs me that i have no System Aspi
> > > files installed.
> > > . wnaspi32.dll
> > > . aspi32.sys
> > > . winaspi.dll
> > > . wowpost.exe
> > >
> > > Can some one tell me how i reinstall the above files from my system disk
> > > ( Windows XP Pro' ) with out having to reinstall windows?
> > >
> > > Yours gratefully
> > >
> > > Arioch
> > >
> > >

Hosted by: Eyo Technologies Pty Ltd. Sponsored by: Actiontec Pty Ltd