If you have a LG42PX4DV - I NEED your help!

[19Hz]

Help!!!

I have (stupidly) changed the settings on my LG 42PX4DV Plasma and Didn't write some of them down!!! I need to get the Factory Brightness settings, can anyone help me???

Of course its in the service mode: The way to enter the service mode is to hold down the menu button on the the menu button on the set itself and then hold down the menu button on the remote (hold both down until a new menu comes up). After a few seconds the service menu appears in the upper left hand corner. The swap button on the remote allows you to change the pages. I hope your set is accessable the same way.

There is a White Balance page and the 6 numbers in this page are what i require...

Please? Even if you know someone who might be able to help, I would be so greatfull.

P.S. If you don't know what you are doing, don't do it!!! - i now know.

[Ext User(Alan Rutlidge)]

"19Hz" <19Hz.1wesnw@no-mx.phorums.com.au> wrote in message
news:19Hz.1wesnw@no-mx.phorums.com.au...
>
> Help!!!
>
> I have (stupidly) changed the settings on my LG 42PX4DV Plasma and
> Didn't write some of them down!!! I need to get the Factory Brightness
> settings, can anyone help me???
>
> Of course its in the service mode: The way to enter the service mode is
> to hold down the menu button on the the menu button on the set itself
> and then hold down the menu button on the remote (hold both down until
> a new menu comes up). After a few seconds the service menu appears in
> the upper left hand corner. The swap button on the remote allows you to
> change the pages. I hope your set is accessable the same way.
>
> There is a White Balance page and the 6 numbers in this page are what i
> require...
>
> Please? Even if you know someone who might be able to help, I would be
> so greatfull.
>
> P.S. If you don't know what you are doing, don't do it!!! - i now know.
>
>
> --
> 19Hz

I know this might sound like the blooming obvious, but have you tried
calling LG?

Cheers,
Alan

[19Hz]

I will try that if I can't get it elsewhere, but if they are anything like I expect, they won't know anything thats not in the manual (and I read that cover to cover before i bought the thing).

I expect there are quite a few people around with the display and it would only take a minute fo their time (plus they get to see what other settings are available that they may not have known about).

[19Hz]

Thanks to Zoltrix (DBA Forum) for getting these settings for me, there's nothing worse than knowing your set is not working properly, and it's your fault.


R Gain - 128
G Gain - 113
B Gain - 113
R Offset - 70
G Offset - 55
B Offset - 70

Sounds like the answer to me...