Hosted by: Eyo Technologies Pty Ltd. Sponsored by: Actiontec Pty Ltd
Att: Toyota Experts [Archive] - Aussie Phorums

PDA

View Full Version : Att: Toyota Experts


Ext User(eeviil inc.)
07-03-2006, 07:53 AM
Gday All,

I just bought a cheap RT142 Corona, which needs a few things done to it.
I am having trouble finding wiring diagrams for it. Can anybody tell me
if the wiring (bar the EFI) is the same as the ST141 series? I have an
interesting problem of no high beams when on high beam, but pull the
blinker switch back and I have high beams. In either position the
spotties and high beam indicator on dash light up, but alas no high
beams when they should be working. Anybody experienced this problem before?

Cheers
Adam

Ext User(sgam@hotmail.com)
07-03-2006, 06:53 PM
eeviil inc. wrote:
> Gday All,
>
> I just bought a cheap RT142 Corona,

Is there any other kind? ;)

> which needs a few things done to it.
> I am having trouble finding wiring diagrams for it. Can anybody tell me
> if the wiring (bar the EFI) is the same as the ST141 series? I have an
> interesting problem of no high beams when on high beam, but pull the
> blinker switch back and I have high beams. In either position the
> spotties and high beam indicator on dash light up, but alas no high
> beams when they should be working. Anybody experienced this problem before?
>

Sounds to me like the headlight relay, which should be a cinch to find
at your local toyota dealership for not a whole lotta money. Keep in
mind that most OE relays swap the pins around so you can't just plug in
a standard 4 or 5 pin relay off the shelf.

Cheers,
Steve

Ext User(cd)
07-03-2006, 09:43 PM
eeviil inc. wrote:
> Gday All,
>
> I just bought a cheap RT142 Corona, which needs a few things done to it.
> I am having trouble finding wiring diagrams for it. Can anybody tell me
> if the wiring (bar the EFI) is the same as the ST141 series? I have an
> interesting problem of no high beams when on high beam, but pull the
> blinker switch back and I have high beams. In either position the
> spotties and high beam indicator on dash light up, but alas no high
> beams when they should be working. Anybody experienced this problem before?
>
> Cheers
> Adam

www.toymods.net/forums

a bunch of RT142 Corona experts there, with wiring diags