bt878 tv/cap drivers/software

[Ext User(Clockmeister)]

Can anyone recommend some decent software that works with an excel
TV/capture card based on the BT878+ chipset?

It's a cheap card which I accept but the software and drivers that come with
it are truly appalling. I'm hoping that some better ones are available so I
can get some use out of this card under XP.

[Ext User(Terry Collins)]

Clockmeister wrote:
> Can anyone recommend some decent software that works with an excel
> TV/capture card based on the BT878+ chipset?

Linux stuff works fine.
Isn't this one a few years old?
>
> It's a cheap card which I accept but the software and drivers that come with
> it are truly appalling. I'm hoping that some better ones are available so I
> can get some use out of this card under XP.

If this is MS2K, I could never get the supplied software to work.

[Ext User(Gregory Kleverlaan)]

"Clockmeister" <no-one@nowhere.com> wrote in message
news:43cb74b6$1@duster.adelaide.on.net...
> Can anyone recommend some decent software that works with an excel
> TV/capture card based on the BT878+ chipset?
>
> It's a cheap card which I accept but the software and drivers that come
> with it are truly appalling. I'm hoping that some better ones are
> available so I can get some use out of this card under XP.

I run windows XP Pro sp2 with the following card.
Brand: Dynalink
Chiset: Bt878

Generic drivers can be found here for BT878
http://btwincap.sourceforge.net/

For capture I use "Cyberlink Power VCR 2 Version 3" software
which works very well under windows xp pro SP2

another good on I also use is WINVDR Pro available at
http://www.artech365.com/

but I mostly use the card just for capturing and It works well with any of
the above software

[Ext User(Clockmeister)]

"Gregory Kleverlaan" <g12345567@nospam.yahoo.com.au> wrote in message
news:43cc0cd8$0$23564$5a62ac22@per-qv1-newsreader-01.iinet.net.au...
>
> "Clockmeister" <no-one@nowhere.com> wrote in message
> news:43cb74b6$1@duster.adelaide.on.net...
>> Can anyone recommend some decent software that works with an excel
>> TV/capture card based on the BT878+ chipset?
>>
>> It's a cheap card which I accept but the software and drivers that come
>> with it are truly appalling. I'm hoping that some better ones are
>> available so I can get some use out of this card under XP.
>
> I run windows XP Pro sp2 with the following card.
> Brand: Dynalink
> Chiset: Bt878
>
> Generic drivers can be found here for BT878
> http://btwincap.sourceforge.net/
>
> For capture I use "Cyberlink Power VCR 2 Version 3" software
> which works very well under windows xp pro SP2
>
> another good on I also use is WINVDR Pro available at
> http://www.artech365.com/
>
> but I mostly use the card just for capturing and It works well with any of
> the above software

Thank you, I'll try them :-)