need to lift something automatically

[Ext User(mindesign)]

Hi all

wondering if anyone knows of a system or components that would enable me to
set up an automatic lift - At the press of a button, I need it to be raised
approximately 30cm. Press same button and it lowers. the whole thing would
90 long, by 70 deep, by 50 deep, with 30 of it protruding when in the 'up'
position. the whole thing will only weight a maximum of 5 kilos.

For anyone wondering, it is for an exhaust fan, designed to raise and lower
either manually or if possible, by a temperature sensor. When not in use, it
would be flush with the surface of the table I intend to use.

Any help gratefully appreciated

Steve

[Ext User(dezza)]

You should ask here as well.

http://groups.google.com/group/aus.electronics.

[Ext User(mindesign)]

APOLOGIES FOR THE PREVIOUS BRAIN-FREE DIMENSIONS

Hi all

wondering if anyone knows of a system or components that would enable me to
set up an automatic lift - At the press of a button, I need it to be raised
approximately 300mm. Press same button and it lowers. the whole thing would
900mm long, by 70mm deep, by 500 high, with 300 of it protruding when in the
'up'
position. the whole thing will only weight a maximum of 5 kilos.

For anyone wondering, it is for an exhaust fan, designed to raise and lower
either manually or if possible, by a temperature sensor. When not in use, it
would be flush with the surface of the table I intend to use.

Any help gratefully appreciated

Steve

[Ext User(mindesign)]

have done - thanks!

Steve


"dezza" <prosonics@yahoo.com.au> wrote in message
news:1156664821.454173.147590@74g2000cwt.googlegro ups.com...
>
> You should ask here as well.
>
> http://groups.google.com/group/aus.electronics.
>

[Ext User(TT)]

"mindesign" <seriph_I_SAID_NO_BLOODY_SPAM@consultant.com>
wrote in message
news:LtaIg.10383$b6.139812@nasal.pacific.net.au...
: Hi all
:
: wondering if anyone knows of a system or components that
would enable me to
: set up an automatic lift - At the press of a button, I
need it to be raised
: approximately 30cm. Press same button and it lowers. the
whole thing would
: 90 long, by 70 deep, by 50 deep, with 30 of it protruding
when in the 'up'
: position. the whole thing will only weight a maximum of 5
kilos.
:
: For anyone wondering, it is for an exhaust fan, designed
to raise and lower
: either manually or if possible, by a temperature sensor.
When not in use, it
: would be flush with the surface of the table I intend to
use.
:
: Any help gratefully appreciated
:
: Steve
:
:
Google for a Plasma or Projector lift (table mount of
course).

Cheers TT