PDA

View Full Version : error massage 0x0000007b



Ext User(Martin)
03-06-2007, 12:44 AM
Hi everybudy ..... when I put the windows xp CD to drive to format and
instal fresh windows always I see this error oxoooooo7b
(oxf7c79524,oxc0000034,0x00000000.ox00000000) and then I cant ****inue !!!!
what should I do?

Ext User(John John)
03-06-2007, 01:33 AM
Ha, ha... funny. This isn't a chatroom. How do you think that the
ladies reading your post feel about your "typos"?

You will literally have to *F6* your way out of this one. And you will
need a "dickskette" to F6!

John

Sorry I just couldn't help it! I know I shouldn't preach one thing and
do the opposite...do as I say not as I do...

Martin wrote:

> Hi everybudy ..... when I put the windows xp CD to drive to format and
> instal fresh windows always I see this error oxoooooo7b
> (oxf7c79524,oxc0000034,0x00000000.ox00000000) and then I cant ****inue !!!!
> what should I do?
>

Ext User(nass)
03-06-2007, 05:19 AM
"Martin" wrote:

> Hi everybudy ..... when I put the windows xp CD to drive to format and
> instal fresh windows always I see this error oxoooooo7b
> (oxf7c79524,oxc0000034,0x00000000.ox00000000) and then I cant ****inue !!!!
> what should I do?

Does this OEM machine?, if so you need to get the Drivers CD to insert to
install the driver from it for your Devices and Motherboard.
Also make sure there is n't a printer or any attached devices during the
setup.
Limited OEM driver support is available with F6 during Windows XP and
Windows Server 2003 setup
http://support.microsoft.com/kb/314859
How to troubleshoot "Stop 0x0000007B" errors in Windows XP
http://support.microsoft.com/kb/324103
You receive a Stop 0x0000007B error after you move the Windows XP system
disk to another computer
http://support.microsoft.com/kb/314082

"STOP 0x0000007B" error message when you restart your Windows XP-based
computer
http://support.microsoft.com/kb/316401
"STOP 0x0000007B: INACCESSIBLE_BOOT_DEVICE" error message when you start
your computer from a WinPE CD-ROM or from a Windows Server 2003 CD-ROM by
using a USB CD-ROM device
http://support.microsoft.com/kb/839210/
You may receive a "Stop" error message on a computer that is running Windows
Server 2003, Windows 2000, Windows Small Business Server 2003, Small Business
Server 2000, or Windows XP
http://support.microsoft.com/kb/892000
Troubleshooting Bootable CD-ROM
http://msdn2.microsoft.com/en-us/library/ms940808.aspx

How to install a clean copy of XP:
http://www.michaelstevenstech.com/cleanxpinstall.html
HTH.
nass
-------
www.nasstec.co.uk

Ext User(Ron Martell)
03-06-2007, 05:19 AM
Martin <Martin @discussions.microsoft.com> wrote:

>Hi everybudy ..... when I put the windows xp CD to drive to format and
>instal fresh windows always I see this error oxoooooo7b
>(oxf7c79524,oxc0000034,0x00000000.ox00000000) and then I cant ****inue !!!!
>what should I do?

STOP 0x0000007B: INACCESSIBLE_BOOT_DEVICE

What is your hardware configuration? Are you installing on a RAID
system (bad idea generally in my opinion) or perhaps install an older
version of XP (original or Service Pack 1) on a SATA hard drive?

Go to the hard drive manufacturer's web site and download their free
diagnostic utility. Run this to check out the hard drive for possible
defects or problems.

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2008)
On-Line Help Computer Service
http://onlinehelp.bc.ca
Syberfix Remote Computer Repair

"Anyone who thinks that they are too small to make a difference
has never been in bed with a mosquito."

Hosted by: Eyo Technologies Pty Ltd. Sponsored by: Actiontec Pty Ltd