Anyone knows of a region unlock code for XMS-1050 DVD

[Edzo]

Can someone tell me how to make my XMS1050 region free.

Thanks Very much...:(

[Rick]

Try here dude

http://www.dvdrhelp.com/dvdhacks.php?dvdplayer=xms&Search=Search


xms-1050 not listed but hacks for other xms machines seen to be the same. worth a try :)

[Edzo]

Thanks Rick, I know it is not listed.
Anyway I have already found out how to make it region free.

Cheers.....

[redbears]

If you could, please post your fix here, so others may benefit from it.

Cheers

[jokiin]

details of some of the common models on the market below




Sansui Micro750

• The unit is not multizone, but an upgrade disc is available
XMS Tips

• All XMS models are 'built-in' Multizone. If a unit does not play movies other than Zone 4, use code 33080 to multizone.
• All models are now Macrovision enabled i.e. they can no longer be connected though VCRs or record from VCR.
• Parental lock code is 3308.



Singer SG001

Multizone Procedure:

• Open tray
• Press 74 on remote
• Press Enter to get a service menu scroll to Region code
• Change to 13
• Press exit on remote


Singer SGW79TVD

Multizone Procedure:

• Open tray
• Press 1111 on remote followed by zone code (e.g. for Zone 1, press 1111 then 1)
• Press Enter
• Now the unit is ready for Zone 1. To play Zone 4 movies, you need to follow the above procedure again.


Diamond DVD101 & DVD105

Multizone Procedure:

• Open tray
• Press 9999 on remote
• Press OK
• Press 9 = All code, 4 = Zone 4, 3 = Zone 3 ...



RZ9700AVD Multizoning Procedure

• Press the remote "DISPLAY" 4 times; then,
• Press "SUB PIC" 4 times; then,
• Press "MEM" 6 times; then
• Press "0" for all code (TV should also shown all code)

DVX2600 - Multizoning Procedure

• Open Tray
• Press 2918 on the remote
• Press enter on the remote
• The screen should then appear, select COUNTRY CODE
• Access the region code you wish or simply select 13 for all regions
• Press the return key to confirm the setting.

SGD 004 Multizoning procedure

• Open DVD draw
• Press 3838 on the remote control
• Press enter
• Change zone 4 to 9 on the remote
• Press return and close the draw .

HT100 Multizoning Procedure

• No disc in tray
• Press menu
• Press 167
• Press mute

DVX2290 Multizoning Procedure

Built in multizone. To turn off the macriovision function please follow the below instructions:

• Open Tray
• Set up
• Arrow up to 4001
• Left / right arrow and change to 4000
• Close or return
• Exit set up

DVD201 Multizonong Procedure

• Open tray
• Press 2918 and press enter a manufacturers manual will appear on the screen
• Use the up and down button and go to country code. Press enter and enter number 13 far all regions.
• Press enter
• Press set up

DVX1000 Multizoning Procedure

• The DVX1000 has a multizoning upgrade disc available, you will just need to contact the Home Entertainment team to get one sent out

DVX2000 Multizoning Procedure

• The DVX2000 is already multizoned

SLP3000 & 4000 Multizoning Procedure

• Upgrade disc is available through the Home Entertainment team.

RZ8700 Multizoning Procedures

• Turn on the power
• Make sure no disk is inside, and keep tray close
• Press 2918 on the remote, and press ENTER on the remote
• The screen should appears, select COUNTRY CODE, access the region code
You wish (Note: Access 13 for all code, then enter)
• Press RETURN key to confirm the setting.

DV-X2100 MULTIZONE PROCEDURES

• Turn on the power
• Open the disc tray
• Press the numbers on the remote control “2812”, and press ENTER
• The setup screen should be shown on TV
• Select COUNTRY CODE, and access the region code you wish.
• Access 13 for multizone
• Press RETURN key to confirm the setting.


Multizone procedure for Diamond DVD8080B, DVD8073, DVD0302

• Open tray
• Press 9 four times on the remote control
• Then press enter until no. 9 shows on the TV picture in the right upper corner.
(9 = multizone)

Sony

The DVPNS300 and the DVPNS305 are both multizoned models. The DAVS500 is NOT a multizoned unit.


Multizone Set up for Z385, Z395 & SA100

• Press Eject button to open tray (keep it open)
• Press set up key
• Press either Stop or Pause, then quickly…
• Press I◄◄ then ►►I ……then you can see ZONE SET UP on TV screen




MC-1100 multizone setting:

Unlock the 'Parental Lock'
• Switch on the player
• Press 'Menu' on remote control
• Select 'Setting' and press 'General Setting'
• Select 'Parental Lock' and press 'Unlock Parental Lock'
• Press password '3308' then 'Enter'


Instructions for Multizoning
After putting the disc in the player:
• Press 'STOP' twice. The unit will be under 'Stop' status. (If error logo appears on TV, remove the disc, switch off the power and repeat the above).
• Press 'UP ARROW', 'DOWN ARROW', 'LEFT ARROW', 'RIGHT ARROW' then press 'ENTER'
• Then choose the Code number button:
0 - Full Zone
1 - 1 Zone
2 - 2 Zone
3 - 3 Zone
4 - 4 Zone
5 - 5 Zone
6 - 6 Zone
The upper left corner of the TV screen will show number for confirmation.
After the zone setting has been set, multizoning is complete.


OMNI DVD PLAYERS DV3300 & DV3200P TIPS

The new DV3300D and DV3200P may still have parental lock password
set.

The default password for DV3300D is 3308 (like the 3102 & 3003).

For 3200P password is 1999, however because the default setting is set on
"no restriction" there shouldn't be any problems.



DV3300

Some units are being sent back as faulty with descriptions " no picture and no sound". What has happened the end user is changing the video output settings from Default Composite (RGB) to Component video, hence loosing their display.
All that needs to be done is to hook the video cable up to the top jack of the component video output, and then you'll get a black and white picture and then go back into the setup and change the settings back to Composite video (RGB).


DV3200P

This will help clarify some confusion over the stereo settings of the new DV-3200P model.

On this new model the stereo output and 5.1Ch surround sound output are in fact separated. However you still need to set the DVD's speaker output to output through 2 speakers only. By default the player is setup to be 5.1Ch output.

The solution is quite simple. Just go to the menu, and under "speaker" option, turn the "centre" and "surround" and / or "subwoofer) speakers options to <off>, it should automatically Downmix the sound to stereo sound for the customer.
The fact you plugged the TV into the separate 2 ch output doesn't downmix the sound automatically.

DVD360A Hyundai Multizoning Procedure

1. Open the tray
2. Press 3800 on the remote
3. Press Menu on the remote, the hidden menu with the region settings will appear
4. Press zero for all regions

DM350 Hyundai Multizoning Procedure

1.Turn on the unit
2. Press Menu key on remote control
3. Go to Custom set-up using the right arrow key
4. Enter 3 four times (3333) on the remote
5. Zone selection will appear on the screen. Pick your desired zone 0-6, 0 meaning multizone
6. Press Menu key on the remote to confirm setting

ZDVD105 Zeus Multizoning Procedure

1. Switch on the power.
2. Press stop button once on remote control
3. Enter "1999" on the remote, menu will then show on the screen.
4. Press the cursor to desired code.
5. Press enter to finish setting.

DVX1200 Sansui Multizoning Procedure

1.Press the on button
2.push 'stop' on the remote control
3.push 1999 on the remote control
4.select region code
5.press enter on the remote to complete

DVX2700 Sansui Multizoning Procedure

1. Open the disc drawer by the remote
2. Press "SETUP" on the remote
3. Press "STOP" on the remote
4. Press "SKIP BACKWARD" on the remote
5. Press "SKIP FORWARD" on the remote
6. The factory control manual will appear on the TV screen
7. Select "region code"
8. select "by pass"

OMNI DVC6200D MULTIZONING PROCEDURE

1. Open DVD Tray
3. On the remote control press the following number in the order given 0,5,2,0 and then the arrow keys up, down, left, right
4. Close DVD tray
If the above procedure have been conducted correctly you will see " region free" appear on the TV screen.

RZ-9900AVD

Adjust the zone code with steps as following:

1. Press "Eject" on remote to open loader.
2. Press "8421" on remote, TV will display current zone code.
3. Press "Play" on remote to change zone code (9 is free zone).
4. Press "Eject" on remote again to close loader.

XMS-1950/7500/9550 Multizoning procedure

1.Open the tray
2.Press 7739 on remote
3.Press select
3.Press 0 for all regions
4.Close the tray

DVD988 macrovision disabling

1. Press Open on remote to open tray
2. Press 8,8,0,6 on remote
3. Select area code setting or MACROVISION setting in grey menu and "CONFIRM" it

[Edzo]

I not sure whether it will work for all XMS DVD players, but this is what I used.

1. First open the player's tray, make sure it is empty.
2. Press 3, 3, 0, 8 on the remote control,followed by 0 (region free number)
3. Close the player's tray.
4. Use the remote control and not the buttons on the player.

If it does not work, try again. If it fails again. You might have to try something else. Good luck.

[redbears]

Looks like some good info for others check out... thanks for that guys!

[jokiin]

Originally posted by Edzo
I not sure whether it will work for all XMS DVD players, but this is what I used.

1. First open the player's tray, make sure it is empty.
2. Press 3, 3, 0, 8 on the remote control,followed by 0 (region free number)
3. Close the player's tray.
4. Use the remote control and not the buttons on the player.

If it does not work, try again. If it fails again. You might have to try something else. Good luck.

worth mentioning that the last digit entered sets the region, 0 for all region or 1 for region 1, 2 for 2 etc, which is handy if you have rce discs which expect to see zone specific info. Also on the xms models the code can be entered from the front panel, doesn't have to be from the remote. Also for the older xms750 uses a different code, although there wouldn't be too many of these around which haven't been done already (the early one was macro free out of the box) The xms150 can be made macro free quite easily, very small file needs to burnt to disc, put it in the drive and it's all done in about a minute.

[witjuti]

I not sure whether it will work for all XMS DVD players, but this is what I used.

1. First open the player's tray, make sure it is empty.
2. Press 3, 3, 0, 8 on the remote control,followed by 0 (region free number)
3. Close the player's tray.
4. Use the remote control and not the buttons on the player.

If it does not work, try again. If it fails again. You might have to try something else. Good luck.


I realise this thread is old, however I just imported a region 2 disc from Germany and needed to modify my XMS 1050 region code. The above info worked a treat first time.

Thanks for posting the info.

Regards
Wit