Hosted by: Eyo Technologies Pty Ltd. Sponsored by: Actiontec Pty Ltd
power window not working [Archive] - Aussie Phorums

PDA

View Full Version : power window not working


Ext User(novaa)
30-03-2008, 09:53 PM
I have a Holden Commodore Acclaim VX 2002. The drivers side power window no
longer works. It's currently up. When you press the button there is a
clicking noise, but no movement in the window. The other windows still work
fine.
Any suggestions on the cause and how hard this would be to fix?
Thanks,
Linda

Ext User(Mark Kelep)
30-03-2008, 10:53 PM
"novaa" <raptorsrustheobvious@gmail.com> wrote in message
news:47ef6fb5$0$13091$c30e37c6@pit-reader.telstra.net...
>I have a Holden Commodore Acclaim VX 2002. The drivers side power window no
>longer works. It's currently up. When you press the button there is a
>clicking noise, but no movement in the window. The other windows still
>work fine.
> Any suggestions on the cause and how hard this would be to fix?
> Thanks,
> Linda

Most likely mechanical rather than electrical, so pull off the inside door
stuff and have a look while pressing the button again.
HTH
Mark

Ext User(Klokmeester)
30-03-2008, 11:03 PM
"novaa" <raptorsrustheobvious@gmail.com> wrote in message
news:47ef6fb5$0$13091$c30e37c6@pit-reader.telstra.net...
>I have a Holden Commodore Acclaim VX 2002. The drivers side power window no
>longer works. It's currently up. When you press the button there is a
>clicking noise, but no movement in the window. The other windows still
>work fine.
> Any suggestions on the cause and how hard this would be to fix?

Most probably the regulator has done it's dash.

You will need to remove the door trim to investigate.