Hosted by: Eyo Technologies Pty Ltd. Sponsored by: Actiontec Pty Ltd
D4 to Component Cable [Archive] - Aussie Phorums

PDA

View Full Version : D4 to Component Cable



bergsey
22-01-2004, 05:06 PM
I've been searching for a D4 to Component video cable (Projector to Receiver). There are some out there but the longest I can find is 5m.

I need something around 8 - 10m to have enough length at each end just in case.

Does anyone know of any D4 to 3 RCA adapters, whether you can buy a cable that long, or lastly how to build

I've been thinking of getting the 5m cable and then joining it to another component cable via connectors - not sure if this will noticeably degrade the video quality though

Any advice ? thanks

Miro
22-01-2004, 09:55 PM
"bergsey" <bergsey.10f6fb@no-mx.forums.eyo.com.au> wrote in message
news:bergsey.10f6fb@no-mx.forums.eyo.com.au...
>
> I've been searching for a D4 to Component video cable (Projector to
> Receiver). There are some out there but the longest I can find is 5m.
>
> I need something around 8 - 10m to have enough length at each end just
> in case.
>
> Does anyone know of any D4 to 3 RCA adapters, whether you can buy a
> cable that long, or lastly how to build
>
> I've been thinking of getting the 5m cable and then joining it to
> another component cable via connectors - not sure if this will
> noticeably degrade the video quality though
>
> Any advice ? thanks

wagner.net.au

cable, cutters, crimpers, connectors.