Code for Samsung DVD611

[mrssnow]

Does anyone know the code and instructions to make a Samsung DVD611 into a multiregional?

[jokiin]

Does anyone know the code and instructions to make a Samsung DVD611 into a multiregional?


Always perform a Cold Start before applying the hack below
1. Power on your player
2. Press and hold both the Play and Stop buttons on the player
3. After a short while you should be presented with a set of language options. Release the Play and Stop buttons on the player
4. You will now need to select a language option between 1 and 6
To convert this player to Multi-Region playback
1. Press the Repeat button on your remote control
2. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate
for Region 1 use 2, 9, 3, 3 and 4
for Region 2 use 3, 8, 7, 6 and 7
for Region 3 use 5, 6, 7, 3 and 2
for Region 4 use 7, 6, 8, 8 and 4
for Region 5 use 5, 3, 8, 1 and 4
for Region 6 use 2, 4, 4, 6 and 2

3. A code should be displayed on the screen indicating the current Region setting of your unit.
4. Press the 9 button on your remote control for Region free, or 1 for Region 1, 2 for Region 2 and so on.
5. Press the Open button on your player
6. Press the Standby button on your remote control

[mrssnow]

This doesn't seem to work...any other suggestions?

[jokiin]

This doesn't seem to work...any other suggestions?

I can only suggest trying it again, it's definately the correct code. The only things that come to mind is that you only have a few seconds to start the process before it times out, also make sure that you are entering the correct code from the list, for your player you should be entering 76884, also make sure that you follow the process exactly, some commands have to be entered from the front panel of the player and others are done from the remote. If you still don't have any luck you may need to contact a service centre to find out if there were any updates to the firmware perhaps that may have changed this sequence. I have used these codes to multizone about 30 of these players and it has worked each time.