Foxtel installer pin

[Flip]

Can someone help on what the pin number is, for installer settings on the
pace digital STU.
Thanks

[Bob Starkey]

"Flip" <pg-mail@bigpond.net.au> wrote in message
news:SFvFc.76544$sj4.5375@news-server.bigpond.net.au...
> Can someone help on what the pin number is, for installer settings on the
> pace digital STU.
> Thanks
>
Setup > System Settings > Highlight Picture Settings > press 0611 > Open
Picture Settings

[Ugly]

Are there any other neat hidden menus on the pace digital decoder?



"Bob Starkey" <xyz@sss.net.au> wrote in message
news:AEGFc.77187$sj4.12653@news-server.bigpond.net.au...
> "Flip" <pg-mail@bigpond.net.au> wrote in message
> news:SFvFc.76544$sj4.5375@news-server.bigpond.net.au...
> > Can someone help on what the pin number is, for installer settings on
the
> > pace digital STU.
> > Thanks
> >
> Setup > System Settings > Highlight Picture Settings > press 0611 > Open
> Picture Settings
>
>

[Andrew Woodward]

I'd like to be able to set all times displayed to be either 24 hour or 12 am/pm... not a mixture of both!

I'd like a +/- 2 hour toggle button, to jump back and forth between the tv1 & the tv1 -2hr channels, etc...

I'd like a button to change the tv viewing ratios. Just press a single button, just thinking about how nice that would be......

I'd like more data displayed on the short info banner. Like if there is another channel with the +/- 2hr, what is the channel. It's a pain to have to call up the main menu to do a look-see for it.

I'd like to see what the program ratio is. It's a pain to have to check/remember to go through the process to change the viewing ratio on the "off-chance" that the program can be better viewed in wide screen, etc.

I'd like to display the complete program info from the smaller info banner on future shows. Currently, you can only get the "complete" program info on the current channel.

I'd like the hard disk drive to be activated in my stb now..... not 6 months later down the track.

I'd like a Foxtel remote that can learn the basic input select and volume control signals that my hts uses. It's a pain having to have both remotes at hand. One to change the channels and the other to work the volume on the sound system.

I'd like the "Back" button to take me back to the last channel viewed......

Hmmm.... what was it about Foxtel Digital that was so great in the first place?