eyo technlogies For your PC needs
+ Reply to Thread
Results 1 to 10 of 10

Thread: Power Supply causes BSOD?

  1. #1
    Ext User(Moderately Confused) Guest

    Power Supply causes BSOD?

    Just wondering, can a dying power supply cause a blue screen upon
    startup? I had two fans running, and then all of a sudden, I get a stop
    error. I turn off the computer and unplug the two fans, and bingo, no blue
    screen. I then try each one seperately, and it works both times. I put
    them both onto a switch and thought problem solved.
    Now, the problem has escalated. Sometimes I can get into windows ok,
    but the majority of the time I can only get into safe mode. Any
    suggestions?

    MC



  2. #2
    Ext User(Ken) Guest

    Re: Power Supply causes BSOD?

    On Sat, 21 Aug 2004 15:44:02 -0400, "Moderately Confused"
    <moderatelyconfused@Y@hoo.com> wrote:

    > Just wondering, can a dying power supply cause a blue screen upon
    > startup? I had two fans running, and then all of a sudden, I get a stop
    > error. I turn off the computer and unplug the two fans, and bingo, no blue
    > screen. I then try each one seperately, and it works both times. I put
    > them both onto a switch and thought problem solved.
    > Now, the problem has escalated. Sometimes I can get into windows ok,
    > but the majority of the time I can only get into safe mode. Any
    > suggestions?


    Could be the power suppy. What type do you use?


  3. #3
    Ext User(Moderately Confused) Guest

    Re: Power Supply causes BSOD?


    "Ken" <___ken3@telia.com> wrote in message
    news:3aafi017pvhg56ff7jau96oh6ugavgguj3@4ax.com...
    > On Sat, 21 Aug 2004 15:44:02 -0400, "Moderately Confused"
    > <moderatelyconfused@Y@hoo.com> wrote:
    >
    > > Just wondering, can a dying power supply cause a blue screen upon
    > > startup? I had two fans running, and then all of a sudden, I get a stop
    > > error. I turn off the computer and unplug the two fans, and bingo, no

    blue
    > > screen. I then try each one seperately, and it works both times. I put
    > > them both onto a switch and thought problem solved.
    > > Now, the problem has escalated. Sometimes I can get into windows

    ok,
    > > but the majority of the time I can only get into safe mode. Any
    > > suggestions?

    >
    > Could be the power suppy. What type do you use?


    Just the crap brand that came with the case. I got a good year of full use
    with it. It was pretty loaded, 4 80mm fans, slot blower, 1 160gb hd, 1 60,
    and 1 20, cd burner, 2 cold cathode lights, and some LEDs. I'm suprised it
    lasted this long actually. I really hoping that it's causing my bsod.

    Bob



  4. #4
    Ext User(w_tom) Guest

    Re: Power Supply causes BSOD?

    Yes, power supply is but one reason why strange failures
    happen. So first discover if that supply is reason for
    problem. Because of how a power supply can cause strange
    problems, first verify that supply is good before even
    considering anything else. Procedures to make that
    determination can be performed in seconds:
    "Computer doesnt start at all" in alt.comp.hardware on 10
    Jan 2004 at http://tinyurl.com/2t69q or
    "I think my power supply is dead" in alt.comp.hardware on 5
    Feb 2004 at http://tinyurl.com/yvbw9

    Moderately Confused wrote:
    > Just wondering, can a dying power supply cause a blue screen upon
    > startup? I had two fans running, and then all of a sudden, I get a stop
    > error. I turn off the computer and unplug the two fans, and bingo, no blue
    > screen. I then try each one seperately, and it works both times. I put
    > them both onto a switch and thought problem solved.
    > Now, the problem has escalated. Sometimes I can get into windows ok,
    > but the majority of the time I can only get into safe mode. Any
    > suggestions?
    >
    > MC


  5. #5
    Ext User(Moderately Confused) Guest

    Re: Power Supply causes BSOD?


    > Moderately Confused wrote:
    > > Just wondering, can a dying power supply cause a blue screen upon
    > > startup? I had two fans running, and then all of a sudden, I get a stop
    > > error. I turn off the computer and unplug the two fans, and bingo, no

    blue
    > > screen. I then try each one seperately, and it works both times. I put
    > > them both onto a switch and thought problem solved.
    > > Now, the problem has escalated. Sometimes I can get into windows

    ok,
    > > but the majority of the time I can only get into safe mode. Any
    > > suggestions?
    > >
    > > MC



    "w_tom" <w_tom1@hotmail.com> wrote in message
    news:4128120C.391204EF@hotmail.com...
    > Yes, power supply is but one reason why strange failures
    > happen. So first discover if that supply is reason for
    > problem. Because of how a power supply can cause strange
    > problems, first verify that supply is good before even
    > considering anything else. Procedures to make that
    > determination can be performed in seconds:
    > "Computer doesnt start at all" in alt.comp.hardware on 10
    > Jan 2004 at http://tinyurl.com/2t69q or
    > "I think my power supply is dead" in alt.comp.hardware on 5
    > Feb 2004 at http://tinyurl.com/yvbw9


    The PS definitely works, I'm just not sure if it's a software of hardware
    problem. I need a new PS anyway, so I'll check it out.

    Thanks,

    MC



  6. #6
    Ext User(larrymoencurly) Guest

    Re: Power Supply causes BSOD?

    "Moderately Confused" <moderatelyconfused@Y@hoo.com> wrote in message news:<BoKdneIM3PjEOLrcRVn-vw@comcast.com>...

    > Just wondering, can a dying power supply cause a blue screen upon
    > startup? I had two fans running, and then all of a sudden, I
    > get a stop error. I turn off the computer and unplug the two
    > fans, and bingo, no blue screen. I then try each one seperately,
    > and it works both times. I put them both onto a switch and
    > thought problem solved.
    > Now, the problem has escalated. Sometimes I can get into
    > windows ok, but the majority of the time I can only get into
    > safe mode.


    > Just the crap brand that came with the case. I got a good
    > year of full use with it. It was pretty loaded, 4 80mm fans,
    > slot blower, 1 160gb hd, 1 60, and 1 20, cd burner, 2 cold
    > cathode lights, and some LEDs.


    Are there any loose or corroded connectors? I've had IDE power
    connectors work need tightening by prying a tiny screwdriver between
    each of their pins and the surrounding plastic. Corrosion can often
    be removed by simply plugging in each connector several times, and
    there are contact cleaners (Radio Shack, or even alcohol) that can
    help.

    The only way to know if the PSU is at fault is by taking measurements
    at the mobo and drive power connectors with a digital multimeter while
    everything is hooked up and running. BIOS voltage readings can't be
    trusted because they're often off by more than the 5% allowed
    tolerance, and monitoring programs can add their own errors.

    PSUs can fail gradually from bad electrolytic capacitors, but don't
    open the PSU unless you know how to solder in new ones because there
    are dangerously high voltages inside, even when turned off (always
    unplug the power cord before opening). Mobos can also cause failure
    for the same reason -- see www.badcaps.net.

    http://takaman.jp has what may be the best power needs estimator on
    the web, but PSUs vary a lot in advertised power verses what they can
    actually put out. For example, today I looked at a $10-after-rebate
    420W PSU at Fry's Electronics, and compared to good 300W models it was
    a lot lighter and its transformer and high voltage filters were half
    as large. If you need a new PSU, consider a Fortron-made product
    (Fortron, Sparkle, Hi-Q, PowerQ) from www.newegg.com or
    www.directron.com. They're fairly cheap (350W for about $32,
    delivered), conservatively rated, and top quality.

  7. #7
    Ext User(w_tom) Guest

    Re: Power Supply causes BSOD?

    One cannot just look at the computer and know the power
    supply is working. A power supply that does light lights and
    spin disk drives can be 100% defective. Why you must first
    use the multimeter.

    Caution about so many power supplies sold to or by computer
    assemblers. Defective by design. If the supply does not
    list, in writing, a long list of numerical specs, then the
    supply is typically missing essential functions that cause
    disasters later. A minimally acceptable supply sells for
    about $60 full retail. Those $25 and $40 supplies are often
    the products of dumping because when computer assemblers don't
    even have basic electrical knowledge.

    Power supply problems encompass motherboard controller and
    power switch; not just power supply. The meter recommendation
    discovers power supply integrity. Once integrity of that
    subsystem (not just PSU) is established, only then are you
    ready to move on to other usual suspects.

    First establish hardware integrity before suspecting
    software. For example, minimally acceptable computer system
    manufacturers provide comprehensive diagnostics. Best
    executed in a 100 degree F room - which is normal operating
    temperature for a typical computer with even one case fan.
    Too often, computer assemblers will instead fix a symptom by
    installing more fans rather than fix the originally defective
    hardware Heat - 100 degrees or a hairdryer on high to
    selectively heat component under test - is an essential tool
    used with comprehensive diagnostics to locate failures.

    I don't see the OS listed. Minimally acceptable OSes
    provide further historical and operational information in the
    Event log, Device Manager, and Task manager. More information
    necessary before even trying to fix anything. Also numbers
    from that BSOD provide important information - at least to
    those who don't repair by shotgunning.

    Chances are, only reason you would need a new power supply
    is because the previous one is classic of the defective
    supplies sold so often by computer assemblers. A 250 watt
    supply (if rated correctly) is typically more than enough
    power for most computers. But without those multimeter
    numbers - including numbers that are in the upper 3/4 of those
    limits - then you have no idea yet what to do or if power
    supply is undersized. Too many supplies don't even list their
    wattage accurately because so many computer assemblers hype
    wattage as Tim Allen did in Home Improvement and "More
    Power". Do not wildly buy a new supply or buy one that does
    not provide a long list of necessary internal functions (ie a
    classic supply sold by computer assemblers who have no
    fundamental electrical knowledge).

    Moderately Confused wrote:
    >> ... Procedures to make that determination can be performed
    >> in seconds:
    >> "Computer doesnt start at all" in alt.comp.hardware on 10
    >> Jan 2004 at http://tinyurl.com/2t69q or
    >> "I think my power supply is dead" in alt.comp.hardware on 5
    >> Feb 2004 at http://tinyurl.com/yvbw9

    >
    > The PS definitely works, I'm just not sure if it's a software
    > of hardware problem. I need a new PS anyway, so I'll check it out.
    >
    > Thanks,
    >
    > MC


  8. #8
    Ext User(Tool) Guest

    Re: Power Supply causes BSOD?

    Yeah man with all that stuff you're running off of it (almost
    identical to what I run off my PSU) I'd go with no less then a
    480watt, you can get a nice thermaltake 480watt right now from newegg
    for 56 bucks and its so worth it. Hey for even a little more you can
    get one with a TWV they call it (TWV = Total Watts Viewer) and with a
    480watt power supply costs 71 bucks plus shipping so about 78 bucks.
    I just ordered one, if you want I'll tell you my total wattage that I
    use before you choose the wattage you want to buy.

    ==============
    Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups.

  9. #9
    Ext User(Moderately Confused) Guest

    Re: Power Supply causes BSOD?


    "Tool" <dragonarcher@adelphia-dot-net.no-spam.invalid> wrote in message
    news:4128d3b9$1_2@news.athenanews.com...
    > Yeah man with all that stuff you're running off of it (almost
    > identical to what I run off my PSU) I'd go with no less then a
    > 480watt, you can get a nice thermaltake 480watt right now from newegg
    > for 56 bucks and its so worth it. Hey for even a little more you can
    > get one with a TWV they call it (TWV = Total Watts Viewer) and with a
    > 480watt power supply costs 71 bucks plus shipping so about 78 bucks.
    > I just ordered one, if you want I'll tell you my total wattage that I
    > use before you choose the wattage you want to buy.


    Sure, that would be great. I probably will go with the 480, because I plan
    to get more drives and stuff anyway.

    Thanks

    MC



  10. #10
    Ext User(w_tom) Guest

    Re: Power Supply causes BSOD?

    At 480 watts, the power supply would probably be three times
    larger than required (if it really is 480 watts). Disk drives
    actually draw very little power. Don't fall for the Tim Allen
    hype of more power. More important is less watts while
    putting more money put into other essential power supply
    functions. Because they are selling to the technically naive,
    clone power supply manufacturers dump into N America power
    supplies that hype big watts and don't even provide essential
    functions demanded by Intel, Dell, IBM and so many other
    responsible computer manufacturers.

    Do the numbers. 480 watts is grossly oversized. Fine as
    long as the power supply first contains other essential
    functions. But that means you must spend time learning about
    those other functions (do they even exist in that supply) and
    little time worrying about watts.

    Moderately Confused wrote:
    > Sure, that would be great. I probably will go with the 480, because
    > I plan to get more drives and stuff anyway.
    >
    > Thanks
    >
    > MC


+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts