Aussie Phorums Eyo Technologies For your PC needs

Go Back   Aussie Phorums > USENET / Newsgroup gateway > aus.* > aus.tv.digital

Reply
 
Thread Tools
  #1  
Old 16-12-2003, 11:46 AM
Alex
Guest
 

Posts: n/a
Channel 7 gone

I have Thomson DTI500AU box.

Works fine, but a few days ago Ch 7 simply disappeared. 70,71,72 etc are all
there but not 7.
Re-scanned the chanells a few times, no luck.
Unplugged the box form the power, still no Ch 7.
Can watch it on 72, 73 etc. But where did the normal 7 go ?

I recall that prior to this I had the box frozen.
It was on Ch 9 then.
Sound was going Ok but the picture was frozen and not a sigle button on the
box worked.
The only thing I could do is to unplug it from power.
Then it al was fine.

Do not know if these 2 events are connected.

Regards
Alex


Reply With Quote
  #2  
Old 16-12-2003, 02:12 PM
brad2003 brad2003 is offline
Banned
I'm either new or don't have much to say
 

Join Date: Nov 2003
Location: melbourne
Posts: 81
Send a message via MSN to brad2003
1 word your set top box is fuck :) lol were u from
Reply With Quote
  #3  
Old 16-12-2003, 02:36 PM
Smiling Bob
Guest
 

Posts: n/a
Re: Channel 7 gone

brad2003 <brad2003.yifgb@no-mx.forums.eyo.com.au> wrote in
news:brad2003.yifgb@no-mx.forums.eyo.com.au:
> 1 word your set top box is fuck :) lol were u from


Sorry brad, the primary language of this newsgroup is
English. You're welcome to post in whatever language you
like, but you must understand that if you use something
other than English (as you have here) then most folks
aren't going to understand what you're talking about.

I hope this helps,

Bob
Reply With Quote
  #4  
Old 16-12-2003, 03:46 PM
Gronk221
Guest
 

Posts: n/a
Re: Channel 7 gone

I actually thought that Brad's english was improving !

----------------------------------------


"Smiling Bob" <usenet@flyingbob.bsd-fan.com> wrote in message
news:Xns9453936F9F049smilingbobafakeaddre@202.139. 83.40...
> brad2003 <brad2003.yifgb@no-mx.forums.eyo.com.au> wrote in
> news:brad2003.yifgb@no-mx.forums.eyo.com.au:
> > 1 word your set top box is fuck :) lol were u from

>
> Sorry brad, the primary language of this newsgroup is
> English. You're welcome to post in whatever language you
> like, but you must understand that if you use something
> other than English (as you have here) then most folks
> aren't going to understand what you're talking about.
>
> I hope this helps,
>
> Bob



Reply With Quote
  #5  
Old 20-12-2003, 09:36 AM
Ken MacRaild
Guest
 

Posts: n/a
Re: Channel 7 gone

I had something like this happen on my TEAC box a few weeks ago. All of the
7 signals became 351, 352 etc, like 7 wasnt identifying themselves properly.
It rectified itself a few days later, though I did retune a few times...

"Alex" <alex@nospam.com> wrote in message
news:brlkcb$64u$1@lust.ihug.co.nz...
> I have Thomson DTI500AU box.
>
> Works fine, but a few days ago Ch 7 simply disappeared. 70,71,72 etc are

all
> there but not 7.
> Re-scanned the chanells a few times, no luck.
> Unplugged the box form the power, still no Ch 7.
> Can watch it on 72, 73 etc. But where did the normal 7 go ?
>
> I recall that prior to this I had the box frozen.
> It was on Ch 9 then.
> Sound was going Ok but the picture was frozen and not a sigle button on

the
> box worked.
> The only thing I could do is to unplug it from power.
> Then it al was fine.
>
> Do not know if these 2 events are connected.
>
> Regards
> Alex
>
>



Reply With Quote
  #6  
Old 21-12-2003, 07:56 AM
Jeff Westwood
Guest
 

Posts: n/a
Re: Channel 7 gone

I have had this on my Teac twice now. Each time I retuned straight away and
it was fine.

Jeff Westwood


"Ken MacRaild" <kenmacraild@hot-mail.com> wrote in message
news:q0LEb.58631$aT.45776@news-server.bigpond.net.au...
> I had something like this happen on my TEAC box a few weeks ago. All of

the
> 7 signals became 351, 352 etc, like 7 wasnt identifying themselves

properly.
> It rectified itself a few days later, though I did retune a few times...
>
> "Alex" <alex@nospam.com> wrote in message
> news:brlkcb$64u$1@lust.ihug.co.nz...
> > I have Thomson DTI500AU box.
> >
> > Works fine, but a few days ago Ch 7 simply disappeared. 70,71,72 etc are

> all
> > there but not 7.
> > Re-scanned the chanells a few times, no luck.
> > Unplugged the box form the power, still no Ch 7.
> > Can watch it on 72, 73 etc. But where did the normal 7 go ?
> >
> > I recall that prior to this I had the box frozen.
> > It was on Ch 9 then.
> > Sound was going Ok but the picture was frozen and not a sigle button on

> the
> > box worked.
> > The only thing I could do is to unplug it from power.
> > Then it al was fine.
> >
> > Do not know if these 2 events are connected.
> >
> > Regards
> > Alex
> >
> >

>
>



Reply With Quote
  #7  
Old 21-12-2003, 11:06 PM
tifino tifino is offline
EYO forum member
I'm either new or don't have much to say
 

Join Date: Nov 2003
Posts: 21
blame it on seven

[quote=Alex]I have Thomson DTI500AU box.

Works fine, but a few days ago Ch 7 simply disappeared. 70,71,72 etc are all
there but not 7.
Re-scanned the chanells a few times, no luck.
Unplugged the box form the power, still no Ch 7.
Can watch it on 72, 73 etc. But where did the normal 7 go ?

Reply From Tifino: I have a couple of those units, and both have the same problem. Drives mum mad at times! I blame channel seven for the glitch. All I do is delete all carriers and rescan - CH7 always comes back online. To be on the safe side, I am often away so have have selected CH72 for example as my favorite on the 7 carrier. Keeps mum happy.
Reply With Quote
  #8  
Old 22-12-2003, 08:46 PM
Alex
Guest
 

Posts: n/a
Re: Channel 7 gone

Deleted Ch 7 carrier. Re-scanned - all good now.
Rescan without deleting a carrier would not help.

I had my unit frozen before that Ch 7 was gone.
I had already called the shop where I bought it, and they agreed to swap it.
I have been wating for the new box to be transferred to the local branch.

Now we fixed the Ch 7 problem....
All I have is the fact that it lost it at some stage plus that the box got
frozend (hung).

Is there still any point to swap the box ?
Are they all like this anyway ?
Or the other one may be better ?

Regards
Alex

"tifino" <tifino.ysdd0@no-mx.forums.eyo.com.au> wrote in message
news:tifino.ysdd0@no-mx.forums.eyo.com.au...
>
> > x> I have Thomson DTI500AU box.
> >
> > Works fine, but a few days ago Ch 7 simply disappeared. 70,71,72 etc
> > are all
> > there but not 7.
> > Re-scanned the chanells a few times, no luck.
> > Unplugged the box form the power, still no Ch 7.
> > Can watch it on 72, 73 etc. But where did the normal 7 go ?
> >
> > Reply From Tifino: I have a couple of those units, and both have the
> > same problem. Drives mum mad at times! I blame channel seven for the
> > glitch. All I do is delete all carriers and rescan - CH7 always comes
> > back online. To be on the safe side, I am often away so have have
> > selected CH72 for example as my favorite on the 7 carrier. Keeps mum
> > happy.

>
>
> --
> tifino
> ------------------------------------------------------------------------
> tifino's Profile:

http://forums.eyo.com.au/member.php?...fo&userid=7500
> View this thread: http://forums.eyo.com.au/showthread.php?threadid=32968
>



Reply With Quote
  #9  
Old 23-12-2003, 09:39 AM
Cat on a PC©'s Avatar
Cat on a PC© Cat on a PC© is offline
Registered User
I'm either new or don't have much to say
 

Join Date: Oct 2003
Posts: 47
Cable connections

I had a very similar problem when I first installed my Strong SRT5290. For some reason Channel 7 dropped out. I even got those channel 350, 351 etc. After re-scanning it worked fine but eventually it dropped out. I traced the problem down to a dodgy antenna cable I used which was originally plugged into my TV. Sure, it never exhibited problems on my TV, but then I plugged it into the STB. The cable connection was not good, so I bought a new shielded antenna cable and 'voila!' my problems disappeared.

Check your cable. If it's an old one try a new cable and then see if your problems persists.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
failing primary IDE channel Lazarus_M571 Tech Forums 1 03-03-2003 09:03 AM


All times are GMT +11. The time now is 02:30 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Copyright © 2001 - 2006 Forum owner is not responsible for the contents of individual messages posted by others
Before you post a message, please understand that you are personally responsible for what you say on these forums